Finish

The term “finish” encompasses all operations that the printed sheet will further undergo before delivery.
This can include trimming, folding, die cutting or assembling, as well as much more complex operations that will give
the printed works a different feel or additional character.

Thermo-engraving

This type of finish gives relief to the printed text. After it has been printed, the sheet or cardboard is sprinkled with a special powder that clings to the wet ink. When the sheet passes through the oven, the powder melts into the ink and swells, thus producing relief. This type of engraving gives prestige to your printed works by enhancing colours and offering a "refined touch".

Lamination

This process consists of heat-bonding a thin plastic film onto the print. It protects the documents and offers a more attractive finish. The result can be glossy, matte or soft touch (peach skin).

UV Varnish

This finish is generally glossy (but can be matte), and is applied to the entire document (full) or to selected areas (spot) in order to create contrast between materials, thereby highlighting certain elements. This method also allows for the application of scratch-off ink.

Hot foil stamping

This method consists of covering the paper with a gold, silver, or other colour metal film. The patterns are hot pressed onto the paper using a picture (image in relief).

Blind embossing-stamping

This technique consists in pressing a pattern into the paper or cardboard to create relief. This process is also called dry printing as it does not require ink. The embossed pattern is created by a plate, which is applied onto the surface with pressure.

Scoring

This method consists of pressing a straight line into the cardboard to allow for a perfect fold.

Dies

Punching and die cutting are the most common methods used to punch paper or cardboard. To do this, we use a "cutting die", similar to the pastry cutters used to make holes in pie dough. These shapes can range from simple notches to complex and unique shapes.

Folding

We offer a full range of folds for your leaflets: single folds, roll folds, gate folds, Z folds (accordion), cross folds and economic folds.

single folds
roll folds
gate folds
Z folds
(accordion)
cross folds
economic folds

Binding

Binding consists in putting together several pages or signatures in a specific order to create a book or magazine, for example. Binding encompasses a multitude of possibilities: Stapled and omega stapled binding, perfect binding, sewn binding, Pur adhesive binding, and the Wire-O (spiral).

stapled binding
omega stapled binding
sewn binding
pur adhesive binding
Wire-o

Laminating

Laminating consists in pasting an entire surface of cardboard over another, similar or different. A piece of cardboard (0.5, 1 or 2 mm thick) may also be inserted between the two. This type of finish adds significant thickness to the cardboard.

Handling techniques

Paperland offers a complete range of handling techniques. Simple sizing, colouring of the edge and of laminated cardboards, folding, enveloping, shrink wrapping, etc.